How To Change Code On Schlage Lock Be365. The lock will flash green and beep once, and that means the operation is successful. Press the schlage button.* rotate the thumbturn away from the hinges.
Rotate the thumbturn away from the hinges. * if the turn lock feature is disabled, a valid user code must be entered to lock the door. The schlage button will light green for one second.
After Watching This Video, You Will Know How To Set Up Your Schlage Be365 Keypad Deadbolt, Add A User Code, Delete A User Code, Disable All User Codes, And H.
Wait for the lock to beep three times and flash orange light times. To add a new entry code: Model be365 locking and unlocking from the outside:
Just Like Any Other System, It Needs To Be Told That It Is About To Receive The New Key Code.
To add a new code at any time you will follow this sequence: Press the schlage button.* rotate the thumbturn away from the hinges. To do this on schlage locks, you will have to press the “schlage” button while also pushing the number one on the pad at the same time.
* If The Turn Lock Feature Is Disabled, A Valid User Code Must Be Entered To Lock The Door.
Enter your new programming code and wait for the usual 3 orange flashes and 3 beeps. The schlage button will light green for one second. Press the schlage button and the number 1 button simultaneously.
Pushing The Shlage Button And The 1 Key Primes The Lock To Accept A New Entry Code.
To reset a schlage electronic be365 or be575/595 lock: Press the schlage button and then press 3. See enable or disable lock &.
Preparing The System Of The Lock To Accept The New Key Code.
Wait for the schlage button to beep and flash three times. Then, press and hold the schlage button until it lights green and the lock beeps. Locking and unlocking from the outside: